Wed, 05 Jun 2013 18:47:39 -0700 |
Mike Pavone |
Fix LDI
|
Tue, 04 Jun 2013 22:30:49 -0700 |
Mike Pavone |
Fix set/res when the operand is in memory
|
Tue, 04 Jun 2013 21:23:12 -0700 |
Mike Pavone |
Initial implementation of channel 3 special mode
|
Tue, 04 Jun 2013 09:16:41 -0700 |
Mike Pavone |
Fix operator precedence bug with sustain level
|
Mon, 03 Jun 2013 23:44:11 -0700 |
Mike Pavone |
Fix modulation shift value
|
Mon, 03 Jun 2013 21:43:38 -0700 |
Mike Pavone |
Make the PSG and YM2612 use the master clock internal with an increment based on clock divider so that they stay perflectly in sync. Run both the PSG and YM2612 whenver one of them needs to be run.
|
Sun, 02 Jun 2013 22:37:48 -0700 |
Mike Pavone |
Make shift value of operator output to modulation input a define
|
Sun, 02 Jun 2013 22:33:27 -0700 |
Mike Pavone |
Adjust shift for feedback
|
Sun, 02 Jun 2013 22:30:41 -0700 |
Mike Pavone |
Initial stab at feedback
|
Sun, 02 Jun 2013 21:52:42 -0700 |
Mike Pavone |
Fix key scaling
|
Sun, 02 Jun 2013 21:38:18 -0700 |
Mike Pavone |
Clear IFF1 and IFF2 when an interrupt is taken on the Z80
|
Sun, 02 Jun 2013 21:12:43 -0700 |
Mike Pavone |
Fix YM2612 busy flag
|
Sun, 02 Jun 2013 21:12:26 -0700 |
Mike Pavone |
Fix cycle count for inc and dec
|
Sun, 02 Jun 2013 20:14:27 -0700 |
Mike Pavone |
Bunch of Z80 debugger improvements
|
Sun, 02 Jun 2013 13:42:33 -0700 |
Mike Pavone |
Use signed ints for things that represent signed values in YM2612 core
|
Sun, 02 Jun 2013 00:00:22 -0700 |
Mike Pavone |
Fix register to operator mapping. Fix rate table generation. Add TL to envelope value rather than using it as a limit for the attack phase.
|
Fri, 31 May 2013 21:30:11 -0700 |
Mike Pavone |
Fix left/right enable default value
|
Fri, 31 May 2013 20:47:34 -0700 |
Mike Pavone |
Make the n command in the Z80 debugger actually run the next instruction without needing a c command
|
Fri, 31 May 2013 20:46:56 -0700 |
Mike Pavone |
Fix P condition in Z80 core
|
Fri, 31 May 2013 19:43:13 -0700 |
Mike Pavone |
Partial implementation of Z80 debugger
|
Wed, 29 May 2013 21:21:14 -0700 |
Mike Pavone |
Actually save the shifted phase inc after applying the block shift
|
Wed, 29 May 2013 00:57:19 -0700 |
Mike Pavone |
Incredibly broken YM2612 support plus a fix to Z80 bus request
|
Wed, 29 May 2013 00:13:48 -0700 |
Mike Pavone |
Fix push AF
|
Mon, 27 May 2013 22:19:11 -0700 |
Mike Pavone |
YM2612 WIP update
|
Mon, 27 May 2013 20:56:02 -0700 |
Mike Pavone |
Fix deadlock on quit
|
Mon, 27 May 2013 20:37:55 -0700 |
Mike Pavone |
Fix sizeof expression passed to malloc in z80_init to avoid a minor memory error
|
Mon, 27 May 2013 09:54:58 -0700 |
Mike Pavone |
YM2612 WIP snapshot before register refactor
|
Fri, 24 May 2013 00:41:54 -0700 |
Mike Pavone |
Make Z80 writes to VDP/PSG not potentially crash the emulator
|
Fri, 24 May 2013 00:26:27 -0700 |
Mike Pavone |
Allow VDP/PSG writes from Z80
|
Thu, 23 May 2013 23:55:42 -0700 |
Mike Pavone |
Get rid of debug puts and limit based on audio rather than frame rate by default.
|
Thu, 23 May 2013 23:51:49 -0700 |
Mike Pavone |
Fix clipping in PSG core
|
Thu, 23 May 2013 23:42:42 -0700 |
Mike Pavone |
Initial PSG support. Mostly works, noise channel is borked though.
|
Wed, 22 May 2013 09:37:02 -0700 |
Mike Pavone |
Updated todo list
|
Tue, 21 May 2013 23:29:48 -0700 |
Mike Pavone |
Finish SRAM support for games without a SEGA mapper
|
Tue, 21 May 2013 22:08:59 -0700 |
Mike Pavone |
Support for SRAM with SEGA mapper. Half-finished support for SRAM without SEGA mapper.
|
Tue, 21 May 2013 19:26:20 -0700 |
Mike Pavone |
Refactor code gen for read/write functions
|
Tue, 21 May 2013 01:14:59 -0700 |
Mike Pavone |
Fix some minor copy pasta bugs that resulted in an unnecessary REX prefix being generated for some instructions
|
Tue, 21 May 2013 01:10:04 -0700 |
Mike Pavone |
m68k_trap is now replaced with a generated one so it can call the generated memory acccess functions. The old static memory access functions have been removed from runtime.S
|
Tue, 21 May 2013 00:56:56 -0700 |
Mike Pavone |
Generate handle_cycle_limit_int at runtime so it can refer to the runtime generated memory map functions
|
Sun, 19 May 2013 18:40:34 -0700 |
Mike Pavone |
Fix a region detection bug
|
Sun, 19 May 2013 13:47:47 -0700 |
Mike Pavone |
Don't sync the 68K clock to the VDP clock unless the 68K had to wait for the VDP. This unfortunately breaks the direct color DMA demos, but should be more correct overall.
|
Sun, 19 May 2013 11:38:15 -0700 |
Mike Pavone |
Handle busack across frame boundary
|
Sat, 18 May 2013 11:44:42 -0700 |
Mike Pavone |
Mostly working runtime generation of memory map read/write functions
|
Thu, 16 May 2013 09:37:53 -0700 |
Mike Pavone |
Get frame time correct and frame rate sort of correct for EUR region
|
Wed, 15 May 2013 23:51:22 -0700 |
Mike Pavone |
Support regions other than USA
|
Wed, 15 May 2013 23:32:21 -0700 |
Mike Pavone |
Set window title based on ROM header name
|
Wed, 15 May 2013 22:39:36 -0700 |
Mike Pavone |
Increase sample size for min_delay
|
Wed, 15 May 2013 22:37:25 -0700 |
Mike Pavone |
Re-enable frame limit, but add a command line flag to disable it
|
Wed, 15 May 2013 22:37:04 -0700 |
Mike Pavone |
Fix background color regsiter number
|
Tue, 14 May 2013 22:52:15 -0700 |
Mike Pavone |
Fix a stupid bug in z80 busreq acknowledge delay code and make some small improvements there too
|
Tue, 14 May 2013 21:59:56 -0700 |
Mike Pavone |
Some Z80 interrupt fixes
|
Tue, 14 May 2013 00:46:34 -0700 |
Mike Pavone |
Only latch video mode at the very beginning of the frame to avoid problems with the cycle count getting out of sync with what I expect
|
Tue, 14 May 2013 00:40:10 -0700 |
Mike Pavone |
Update Z80 vint timing
|
Tue, 14 May 2013 00:28:45 -0700 |
Mike Pavone |
Update hv counter calculation for clock wonkiness
|
Tue, 14 May 2013 00:03:26 -0700 |
Mike Pavone |
Fixup VINT cycle and HBLANK flag for the previous timing fixes
|
Mon, 13 May 2013 23:42:52 -0700 |
Mike Pavone |
Initial stab at implementing funky clock adjustments during HSYNC for H40 mode
|
Mon, 13 May 2013 21:52:33 -0700 |
Mike Pavone |
Implement first line/last line weirdness in VDP
|
Mon, 13 May 2013 21:36:33 -0700 |
Mike Pavone |
Fewer magic numbers in the VDP core for the win
|
Mon, 13 May 2013 21:06:08 -0700 |
Mike Pavone |
Added some basic VDP debugging features to debugger. Fixed DMA enable bug
|
Mon, 13 May 2013 21:05:49 -0700 |
Mike Pavone |
Added more 68K test cases
|